Going to buy drapery hardware for your window treatment is something on which you may have very less knowledge and sellers manipulating you with a poor quality are common phenomena. Since we speak for your home, with utter motive of making your home beautiful with sophistication, this post is for solving your confusion, helping you to make the right decision while buying drapery hardware.
In the process of buying drapery
hardware, you need to be clear about the fact that the drapery hardware are
integral part of your window treatment, a slightest error or irresponsibility
can liter the look of the home. Thus, it is mandatory to undertake custom
drapery hardware and buy accordingly. Below are some crucial tips to proceed
with curtains and drapery hardware.
1.
For sliding
Glass Doors
Before getting drapery hardware, it
is important to consider the height and width of sliding door. In that process
measure the perimeter of the sliding door, making sure that the glass is not
crowed and the hardware is not visible from outside.
Curtain and draper hardware will;
require extra support in the sliding glass door as it is movable. So, you may
get a bypass C-ring or a large diameter rod for draperies to open and close
properly.
2.
For a wide
window
Get a custom drapery hardware that
can be attached to a rod if you are having a wide window as grommet or back tab
draperies don’t blend and support well with it. Beside it, the wide window will
require center support brackets too.
Having a bypass center brackets and
bypass c-rings can work better in providing support the draperies and
curtains. To close the wall or loop, you may need small simple end cups to
have a clean look.
3. For tall windows
Buy drapery hardware for a tall window that is more studier, bigger and hard as tell window drapery is heavier than usual. To match the look, the rod, wood or draper hardware support should be strong enough to support it.
4.
For
Pinch-Pleat Panels
If you are interested in having
pinch-plated panels, have a traverse rod that will help you to open and close
the drapery closely. The draperies are pinned to its carriers upon a rod from
one end to other over the window.
You can even use wands or batons on
a rod with closed rings to move the draperies.
5.
For flat
Panel Draperies
In order to go with flat panel or
rod pocket draperies, you can use bracket placement that can divide the wide
window into breaks or sections for smooth mobility.
For these Rod-Pocket draperies
installations, you can use simple metal rods with a coat of designer fabric or
can directly opt for a decorative piece of rod to highlight its shine and
lighten up the room.
6.
For Grommet
Panels
Grommets are a popular choice of
draperies that easily installed without any need of rings or traverse rods. You
will need to have stagnant custom drapery hardware to place and hold this
drapery.
And hence, while remembering these
six points before buying curtain and drapery hardware will surely provide you
solace and a great look to your interior home décor.
Download the Latest Design Ideas Catalog: https://www.galaxy-design.com/download-catalog/
Schedule Your Free Design Consultation: https://www.galaxy-design.com/pre-designconsultation/
No comments:
Post a Comment